Weldmark by Victor

Weldmark by Victor® Acetylene 3-101 Oxy-Fuel Cutting Tips Size: 0

Category Torch Tips and Nozzles
WEM0-3-101
Weldmark by Victor

Weldmark by Victor® Acetylene 3-101 Oxy-Fuel Cutting Tips Size: 0

1 Location: 2 In Stock!
Item Code: WEM0-3-101
The Weldmark® by Victor® Acetylene 3-101 Oxy-Fuel Size 0 Cutting Tip has a cutting capacity of 3/8- 1/2 inches. This general purpose type 3-101 series tip is 0.8" long and 3.3" wide and comes in one piece. It is ideal for hand or machine cutting. It is compatible with CA1350/51/52, CA1260, and CA411-3 cutting attachments, and is capable of cutting 20-24 or 24-28 inches per minute, with an average kerf width of 0.06 inches. It's designed for use with acetylene gas, with a max acetylene gas pressure of 6, and a max oxygen cutting pressure of 35. Oxy-Fuel cutting is a thermal cutting process utilizing oxygen or fuel gases to cut through metals such as mild steel. In this process, the torch heats the steel to its ignition temperature, after which oxygen is directed to the cutting point, burning it into a metal oxide. A stream of gas blows the metal oxide away from the work area, resulting in a clean cut.
Category Torch Tips and Nozzles
Catalog Number WEM 0-3-101

Description

The Weldmark® by Victor® Acetylene 3-101 Oxy-Fuel Size 0 Cutting Tip has a cutting capacity of 3/8- 1/2 inches. This general purpose type 3-101 series tip is 0.8" long and 3.3" wide and comes in one piece. It is ideal for hand or machine cutting. It is compatible with CA1350/51/52, CA1260, and CA411-3 cutting attachments, and is capable of cutting 20-24 or 24-28 inches per minute, with an average kerf width of 0.06 inches. It's designed for use with acetylene gas, with a max acetylene gas pressure of 6, and a max oxygen cutting pressure of 35. Oxy-Fuel cutting is a thermal cutting process utilizing oxygen or fuel gases to cut through metals such as mild steel. In this process, the torch heats the steel to its ignition temperature, after which oxygen is directed to the cutting point, burning it into a metal oxide. A stream of gas blows the metal oxide away from the work area, resulting in a clean cut.
Brand

Weldmark by Victor

Category

Torch Tips and Nozzles

Country of Origin

China

Height

0.800 in

Length

0.800 in

Process

Oxy Fuel

Width

3.300 in

- +
Compare
Weldmark by Victor

Weldmark by Victor® Acetylene 3-101 Oxy-Fuel Cutting Tips Size: 0

Category Torch Tips and Nozzles
WEM0-3-101
Weldmark by Victor

Weldmark by Victor® Acetylene 3-101 Oxy-Fuel Cutting Tips Size: 0

1 Location: 2 In Stock!
Item Code: WEM0-3-101
The Weldmark® by Victor® Acetylene 3-101 Oxy-Fuel Size 0 Cutting Tip has a cutting capacity of 3/8- 1/2 inches. This general purpose type 3-101 series tip is 0.8" long and 3.3" wide and comes in one piece. It is ideal for hand or machine cutting. It is compatible with CA1350/51/52, CA1260, and CA411-3 cutting attachments, and is capable of cutting 20-24 or 24-28 inches per minute, with an average kerf width of 0.06 inches. It's designed for use with acetylene gas, with a max acetylene gas pressure of 6, and a max oxygen cutting pressure of 35. Oxy-Fuel cutting is a thermal cutting process utilizing oxygen or fuel gases to cut through metals such as mild steel. In this process, the torch heats the steel to its ignition temperature, after which oxygen is directed to the cutting point, burning it into a metal oxide. A stream of gas blows the metal oxide away from the work area, resulting in a clean cut.
Category Torch Tips and Nozzles
Catalog Number WEM 0-3-101

Description

The Weldmark® by Victor® Acetylene 3-101 Oxy-Fuel Size 0 Cutting Tip has a cutting capacity of 3/8- 1/2 inches. This general purpose type 3-101 series tip is 0.8" long and 3.3" wide and comes in one piece. It is ideal for hand or machine cutting. It is compatible with CA1350/51/52, CA1260, and CA411-3 cutting attachments, and is capable of cutting 20-24 or 24-28 inches per minute, with an average kerf width of 0.06 inches. It's designed for use with acetylene gas, with a max acetylene gas pressure of 6, and a max oxygen cutting pressure of 35. Oxy-Fuel cutting is a thermal cutting process utilizing oxygen or fuel gases to cut through metals such as mild steel. In this process, the torch heats the steel to its ignition temperature, after which oxygen is directed to the cutting point, burning it into a metal oxide. A stream of gas blows the metal oxide away from the work area, resulting in a clean cut.
Brand

Weldmark by Victor

Category

Torch Tips and Nozzles

Country of Origin

China

Height

0.800 in

Length

0.800 in

Process

Oxy Fuel

Width

3.300 in

- +
Compare
SEARCH ×