Weldmark by Victor

Weldmark by Victor® Natural Gas 3-GPN Oxy-Fuel Cutting Tips Size: 3

Category Torch Tips and Nozzles
WEM3-GPN
Weldmark by Victor

Weldmark by Victor® Natural Gas 3-GPN Oxy-Fuel Cutting Tips Size: 3

1 Location: 4 In Stock!
Item Code: WEM3-GPN
The Weldmark® by Victor® Propane GPN series Oxy-Fuel Size 3 Cutting Tip has a 2-2.5 inch cutting capacity. This general purpose GPN series tip is 0.8" long and 3" wide, and comes in two pieces with a spline insert. It is ideal for hand and machine torch cutting. It is compatible with CA2460/61/62 and CA411-1 cutting attachments, and is capable of cutting 10-14 or 9-12 inches per minute with an average kerf width of 0.10". It's designed for use with Natural Gas and Propane. It has a max Propane pressure of 10 and a max oxygen cutting pressure of 50. Oxy-Fuel cutting is a thermal cutting process utilizing oxygen or fuel gases to cut through metals such as mild steel. In this process, the torch heats the steel to its ignition temperature, after which oxygen is directed to the cutting point, burning it into a metal oxide. A stream of gas blows the metal oxide away from the work area, resulting in a clean cut.
Category Torch Tips and Nozzles
Catalog Number WEM 3-GPN

Fetching product details


Description

The Weldmark® by Victor® Propane GPN series Oxy-Fuel Size 3 Cutting Tip has a 2-2.5 inch cutting capacity. This general purpose GPN series tip is 0.8" long and 3" wide, and comes in two pieces with a spline insert. It is ideal for hand and machine torch cutting. It is compatible with CA2460/61/62 and CA411-1 cutting attachments, and is capable of cutting 10-14 or 9-12 inches per minute with an average kerf width of 0.10". It's designed for use with Natural Gas and Propane. It has a max Propane pressure of 10 and a max oxygen cutting pressure of 50. Oxy-Fuel cutting is a thermal cutting process utilizing oxygen or fuel gases to cut through metals such as mild steel. In this process, the torch heats the steel to its ignition temperature, after which oxygen is directed to the cutting point, burning it into a metal oxide. A stream of gas blows the metal oxide away from the work area, resulting in a clean cut.

Specifications

  • Brand : Weldmark by Victor
  • Category : Torch Tips and Nozzles
- +
Compare
Weldmark by Victor

Weldmark by Victor® Natural Gas 3-GPN Oxy-Fuel Cutting Tips Size: 3

Category Torch Tips and Nozzles
WEM3-GPN
Weldmark by Victor

Weldmark by Victor® Natural Gas 3-GPN Oxy-Fuel Cutting Tips Size: 3

1 Location: 4 In Stock!
Item Code: WEM3-GPN
The Weldmark® by Victor® Propane GPN series Oxy-Fuel Size 3 Cutting Tip has a 2-2.5 inch cutting capacity. This general purpose GPN series tip is 0.8" long and 3" wide, and comes in two pieces with a spline insert. It is ideal for hand and machine torch cutting. It is compatible with CA2460/61/62 and CA411-1 cutting attachments, and is capable of cutting 10-14 or 9-12 inches per minute with an average kerf width of 0.10". It's designed for use with Natural Gas and Propane. It has a max Propane pressure of 10 and a max oxygen cutting pressure of 50. Oxy-Fuel cutting is a thermal cutting process utilizing oxygen or fuel gases to cut through metals such as mild steel. In this process, the torch heats the steel to its ignition temperature, after which oxygen is directed to the cutting point, burning it into a metal oxide. A stream of gas blows the metal oxide away from the work area, resulting in a clean cut.
Category Torch Tips and Nozzles
Catalog Number WEM 3-GPN

Fetching product details


Description

The Weldmark® by Victor® Propane GPN series Oxy-Fuel Size 3 Cutting Tip has a 2-2.5 inch cutting capacity. This general purpose GPN series tip is 0.8" long and 3" wide, and comes in two pieces with a spline insert. It is ideal for hand and machine torch cutting. It is compatible with CA2460/61/62 and CA411-1 cutting attachments, and is capable of cutting 10-14 or 9-12 inches per minute with an average kerf width of 0.10". It's designed for use with Natural Gas and Propane. It has a max Propane pressure of 10 and a max oxygen cutting pressure of 50. Oxy-Fuel cutting is a thermal cutting process utilizing oxygen or fuel gases to cut through metals such as mild steel. In this process, the torch heats the steel to its ignition temperature, after which oxygen is directed to the cutting point, burning it into a metal oxide. A stream of gas blows the metal oxide away from the work area, resulting in a clean cut.

Specifications

  • Brand : Weldmark by Victor
  • Category : Torch Tips and Nozzles
- +
Compare
SEARCH ×