Weldmark by Victor

Weldmark by Victor® Acetylene Airco 164 Oxy-Fuel Cutting Tips Size: 2

Category Torch Tips and Nozzles
WEM164-2
Weldmark by Victor

Weldmark by Victor® Acetylene Airco 164 Oxy-Fuel Cutting Tips Size: 2

Contact us for Availability
Item Code: WEM164-2
The Weldmark® by Victor® Acetylene Airco® 164 series Oxy-Fuel Size 2 Cutting Tip has a 1 inch cutting capacity. This general purpose Airco® series tip is 1" long and 1" wide, and comes in one piece. It is ideal for hand and machine torch cutting on 4700 series machine torches. It is compatible with 3500, 3700, 4800, 5700 and 5800 cutting attachments, and is capable of cutting 14-16 inches per minute. It's designed for use with Acetylene, with a max Acetylene pressure of 3 and a max cutting oxygen pressure of 50. Oxy-Fuel cutting is a thermal cutting process utilizing oxygen or fuel gases to cut through metals such as mild steel. In this process, the torch heats the steel to its ignition temperature, after which oxygen is directed to the cutting point, burning it into a metal oxide. A stream of gas blows the metal oxide away from the work area, resulting in a clean cut.
Category Torch Tips and Nozzles
Catalog Number WEM 164-2

Description

The Weldmark® by Victor® Acetylene Airco® 164 series Oxy-Fuel Size 2 Cutting Tip has a 1 inch cutting capacity. This general purpose Airco® series tip is 1" long and 1" wide, and comes in one piece. It is ideal for hand and machine torch cutting on 4700 series machine torches. It is compatible with 3500, 3700, 4800, 5700 and 5800 cutting attachments, and is capable of cutting 14-16 inches per minute. It's designed for use with Acetylene, with a max Acetylene pressure of 3 and a max cutting oxygen pressure of 50. Oxy-Fuel cutting is a thermal cutting process utilizing oxygen or fuel gases to cut through metals such as mild steel. In this process, the torch heats the steel to its ignition temperature, after which oxygen is directed to the cutting point, burning it into a metal oxide. A stream of gas blows the metal oxide away from the work area, resulting in a clean cut.
Brand

Weldmark by Victor

Category

Torch Tips and Nozzles

Country of Origin

China

Height

1.0 in

Length

1.000 in

Process

Oxy Fuel

Tip Size

2

Width

1.000 in

- +
Compare
Weldmark by Victor

Weldmark by Victor® Acetylene Airco 164 Oxy-Fuel Cutting Tips Size: 2

Category Torch Tips and Nozzles
WEM164-2
Weldmark by Victor

Weldmark by Victor® Acetylene Airco 164 Oxy-Fuel Cutting Tips Size: 2

Contact us for Availability
Item Code: WEM164-2
The Weldmark® by Victor® Acetylene Airco® 164 series Oxy-Fuel Size 2 Cutting Tip has a 1 inch cutting capacity. This general purpose Airco® series tip is 1" long and 1" wide, and comes in one piece. It is ideal for hand and machine torch cutting on 4700 series machine torches. It is compatible with 3500, 3700, 4800, 5700 and 5800 cutting attachments, and is capable of cutting 14-16 inches per minute. It's designed for use with Acetylene, with a max Acetylene pressure of 3 and a max cutting oxygen pressure of 50. Oxy-Fuel cutting is a thermal cutting process utilizing oxygen or fuel gases to cut through metals such as mild steel. In this process, the torch heats the steel to its ignition temperature, after which oxygen is directed to the cutting point, burning it into a metal oxide. A stream of gas blows the metal oxide away from the work area, resulting in a clean cut.
Category Torch Tips and Nozzles
Catalog Number WEM 164-2

Description

The Weldmark® by Victor® Acetylene Airco® 164 series Oxy-Fuel Size 2 Cutting Tip has a 1 inch cutting capacity. This general purpose Airco® series tip is 1" long and 1" wide, and comes in one piece. It is ideal for hand and machine torch cutting on 4700 series machine torches. It is compatible with 3500, 3700, 4800, 5700 and 5800 cutting attachments, and is capable of cutting 14-16 inches per minute. It's designed for use with Acetylene, with a max Acetylene pressure of 3 and a max cutting oxygen pressure of 50. Oxy-Fuel cutting is a thermal cutting process utilizing oxygen or fuel gases to cut through metals such as mild steel. In this process, the torch heats the steel to its ignition temperature, after which oxygen is directed to the cutting point, burning it into a metal oxide. A stream of gas blows the metal oxide away from the work area, resulting in a clean cut.
Brand

Weldmark by Victor

Category

Torch Tips and Nozzles

Country of Origin

China

Height

1.0 in

Length

1.000 in

Process

Oxy Fuel

Tip Size

2

Width

1.000 in

- +
Compare
SEARCH ×