Weldmark by Victor

Weldmark by Victor® Acetylene Smith SC Oxy-Fuel Cutting Tips Size: 3

Category Torch Tips and Nozzles
WEMSC12-3
Weldmark by Victor

Weldmark by Victor® Acetylene Smith SC Oxy-Fuel Cutting Tips Size: 3

1 Location: 1 In Stock!
Item Code: WEMSC12-3
The Weldmark® by Victor® Acetylene Smith SC12 series Oxy-Fuel Size 3 Cutting Tip has a 1 1/2 - 2 inch cutting capacity. This general purpose Smith SC12 series tip is 0.95" long and 3.78" wide, and comes in one piece. It is ideal for hand and machine torch cutting. It is compatible with DG200 and SC200 series cutting attachments. It is capable of cutting 13-16 inches per minute, and has an average kerf width of 0.100". It's designed for use with Acetylene. The max Acetylene pressure is 10 and the max oxygen cutting pressure is 45. Oxy-Fuel cutting is a thermal cutting process utilizing oxygen or fuel gases to cut through metals such as mild steel. In this process, the torch heats the steel to its ignition temperature, after which oxygen is directed to the cutting point, burning it into a metal oxide. A stream of gas blows the metal oxide away from the work area, resulting in a clean cut.
Category Torch Tips and Nozzles
Catalog Number WEM SC12-3

Description

The Weldmark® by Victor® Acetylene Smith SC12 series Oxy-Fuel Size 3 Cutting Tip has a 1 1/2 - 2 inch cutting capacity. This general purpose Smith SC12 series tip is 0.95" long and 3.78" wide, and comes in one piece. It is ideal for hand and machine torch cutting. It is compatible with DG200 and SC200 series cutting attachments. It is capable of cutting 13-16 inches per minute, and has an average kerf width of 0.100". It's designed for use with Acetylene. The max Acetylene pressure is 10 and the max oxygen cutting pressure is 45. Oxy-Fuel cutting is a thermal cutting process utilizing oxygen or fuel gases to cut through metals such as mild steel. In this process, the torch heats the steel to its ignition temperature, after which oxygen is directed to the cutting point, burning it into a metal oxide. A stream of gas blows the metal oxide away from the work area, resulting in a clean cut.
Brand

Weldmark by Victor

Category

Torch Tips and Nozzles

Country of Origin

China

Height

0.950 in

Length

0.950 in

Process

Oxy Fuel

Tip Size

3

Width

3.780 in

- +
Compare
Weldmark by Victor

Weldmark by Victor® Acetylene Smith SC Oxy-Fuel Cutting Tips Size: 3

Category Torch Tips and Nozzles
WEMSC12-3
Weldmark by Victor

Weldmark by Victor® Acetylene Smith SC Oxy-Fuel Cutting Tips Size: 3

1 Location: 1 In Stock!
Item Code: WEMSC12-3
The Weldmark® by Victor® Acetylene Smith SC12 series Oxy-Fuel Size 3 Cutting Tip has a 1 1/2 - 2 inch cutting capacity. This general purpose Smith SC12 series tip is 0.95" long and 3.78" wide, and comes in one piece. It is ideal for hand and machine torch cutting. It is compatible with DG200 and SC200 series cutting attachments. It is capable of cutting 13-16 inches per minute, and has an average kerf width of 0.100". It's designed for use with Acetylene. The max Acetylene pressure is 10 and the max oxygen cutting pressure is 45. Oxy-Fuel cutting is a thermal cutting process utilizing oxygen or fuel gases to cut through metals such as mild steel. In this process, the torch heats the steel to its ignition temperature, after which oxygen is directed to the cutting point, burning it into a metal oxide. A stream of gas blows the metal oxide away from the work area, resulting in a clean cut.
Category Torch Tips and Nozzles
Catalog Number WEM SC12-3

Description

The Weldmark® by Victor® Acetylene Smith SC12 series Oxy-Fuel Size 3 Cutting Tip has a 1 1/2 - 2 inch cutting capacity. This general purpose Smith SC12 series tip is 0.95" long and 3.78" wide, and comes in one piece. It is ideal for hand and machine torch cutting. It is compatible with DG200 and SC200 series cutting attachments. It is capable of cutting 13-16 inches per minute, and has an average kerf width of 0.100". It's designed for use with Acetylene. The max Acetylene pressure is 10 and the max oxygen cutting pressure is 45. Oxy-Fuel cutting is a thermal cutting process utilizing oxygen or fuel gases to cut through metals such as mild steel. In this process, the torch heats the steel to its ignition temperature, after which oxygen is directed to the cutting point, burning it into a metal oxide. A stream of gas blows the metal oxide away from the work area, resulting in a clean cut.
Brand

Weldmark by Victor

Category

Torch Tips and Nozzles

Country of Origin

China

Height

0.950 in

Length

0.950 in

Process

Oxy Fuel

Tip Size

3

Width

3.780 in

- +
Compare
SEARCH ×